/*
 * 'OpenSSL for Ruby' project
 * Copyright (C) 2001-2002  Michal Rokos <m.rokos@sh.cvut.cz>
 * All rights reserved.
 */
/*
 * This program is licensed under the same licence as Ruby.
 * (See the file 'COPYING'.)
 */
#include "ossl.h"

#define NewX509Store(klass) \
    TypedData_Wrap_Struct((klass), &ossl_x509store_type, 0)
#define SetX509Store(obj, st) do { \
    if (!(st)) { \
        ossl_raise(rb_eRuntimeError, "STORE wasn't initialized!"); \
    } \
    RTYPEDDATA_DATA(obj) = (st); \
} while (0)
#define GetX509Store(obj, st) do { \
    TypedData_Get_Struct((obj), X509_STORE, &ossl_x509store_type, (st)); \
    if (!(st)) { \
        ossl_raise(rb_eRuntimeError, "STORE wasn't initialized!"); \
    } \
} while (0)

#define NewX509StCtx(klass) \
    TypedData_Wrap_Struct((klass), &ossl_x509stctx_type, 0)
#define SetX509StCtx(obj, ctx) do { \
    if (!(ctx)) { \
        ossl_raise(rb_eRuntimeError, "STORE_CTX wasn't initialized!"); \
    } \
    RTYPEDDATA_DATA(obj) = (ctx); \
} while (0)
#define GetX509StCtx(obj, ctx) do { \
    TypedData_Get_Struct((obj), X509_STORE_CTX, &ossl_x509stctx_type, (ctx)); \
    if (!(ctx)) { \
        ossl_raise(rb_eRuntimeError, "STORE_CTX is out of scope!"); \
    } \
} while (0)

/*
 * Verify callback stuff
 */
static int stctx_ex_verify_cb_idx, store_ex_verify_cb_idx;
static VALUE ossl_x509stctx_new(X509_STORE_CTX *);

struct ossl_verify_cb_args {
    VALUE proc;
    VALUE preverify_ok;
    VALUE store_ctx;
};

static VALUE
ossl_x509stctx_new_i(VALUE arg)
{
    return ossl_x509stctx_new((X509_STORE_CTX *)arg);
}

static VALUE
call_verify_cb_proc(VALUE arg)
{
    struct ossl_verify_cb_args *args = (struct ossl_verify_cb_args *)arg;
    return rb_funcall(args->proc, rb_intern("call"), 2,
                      args->preverify_ok, args->store_ctx);
}

int
ossl_verify_cb_call(VALUE proc, int ok, X509_STORE_CTX *ctx)
{
    VALUE rctx, ret;
    struct ossl_verify_cb_args args;
    int state;

    if (NIL_P(proc))
        return ok;

    ret = Qfalse;
    rctx = rb_protect(ossl_x509stctx_new_i, (VALUE)ctx, &state);
    if (state) {
        rb_set_errinfo(Qnil);
        rb_warn("StoreContext initialization failure");
    }
    else {
        args.proc = proc;
        args.preverify_ok = ok ? Qtrue : Qfalse;
        args.store_ctx = rctx;
        ret = rb_protect(call_verify_cb_proc, (VALUE)&args, &state);
        if (state) {
            rb_set_errinfo(Qnil);
            rb_warn("exception in verify_callback is ignored");
        }
        RTYPEDDATA_DATA(rctx) = NULL;
    }
    if (ret == Qtrue) {
        X509_STORE_CTX_set_error(ctx, X509_V_OK);
        ok = 1;
    }
    else {
        if (X509_STORE_CTX_get_error(ctx) == X509_V_OK)
            X509_STORE_CTX_set_error(ctx, X509_V_ERR_CERT_REJECTED);
        ok = 0;
    }

    return ok;
}

/*
 * Classes
 */
static VALUE cX509Store;
static VALUE cX509StoreContext;
static VALUE eX509StoreError;

static void
ossl_x509store_mark(void *ptr)
{
    X509_STORE *store = ptr;
    // Note: this reference is stored as @verify_callback so we don't need to mark it.
    // However we do need to ensure GC compaction won't move it, hence why
    // we call rb_gc_mark here.
    rb_gc_mark((VALUE)X509_STORE_get_ex_data(store, store_ex_verify_cb_idx));
}

static void
ossl_x509store_free(void *ptr)
{
    X509_STORE_free(ptr);
}

static const rb_data_type_t ossl_x509store_type = {
    "OpenSSL/X509/STORE",
    {
        ossl_x509store_mark, ossl_x509store_free,
    },
    0, 0, RUBY_TYPED_FREE_IMMEDIATELY | RUBY_TYPED_WB_PROTECTED,
};

/*
 * Public functions
 */
X509_STORE *
GetX509StorePtr(VALUE obj)
{
    X509_STORE *store;

    GetX509Store(obj, store);

    return store;
}

/*
 * Private functions
 */
static int
x509store_verify_cb(int ok, X509_STORE_CTX *ctx)
{
    VALUE proc;

    proc = (VALUE)X509_STORE_CTX_get_ex_data(ctx, stctx_ex_verify_cb_idx);
    if (!proc)
        proc = (VALUE)X509_STORE_get_ex_data(X509_STORE_CTX_get0_store(ctx),
                                             store_ex_verify_cb_idx);
    if (!proc)
        return ok;

    return ossl_verify_cb_call(proc, ok, ctx);
}

static VALUE
ossl_x509store_alloc(VALUE klass)
{
    X509_STORE *store;
    VALUE obj;

    obj = NewX509Store(klass);
    if ((store = X509_STORE_new()) == NULL)
        ossl_raise(eX509StoreError, "X509_STORE_new");
    SetX509Store(obj, store);

    return obj;
}

/*
 * General callback for OpenSSL verify
 */
static VALUE
ossl_x509store_set_vfy_cb(VALUE self, VALUE cb)
{
    X509_STORE *store;

    GetX509Store(self, store);
    rb_iv_set(self, "@verify_callback", cb);
    X509_STORE_set_ex_data(store, store_ex_verify_cb_idx, (void *)cb);
    RB_OBJ_WRITTEN(self, Qundef, cb);

    return cb;
}


/*
 * call-seq:
 *    X509::Store.new => store
 *
 * Creates a new X509::Store.
 */
static VALUE
ossl_x509store_initialize(int argc, VALUE *argv, VALUE self)
{
    X509_STORE *store;

    GetX509Store(self, store);
    if (argc != 0)
        rb_warn("OpenSSL::X509::Store.new does not take any arguments");
    X509_STORE_set_verify_cb(store, x509store_verify_cb);
    ossl_x509store_set_vfy_cb(self, Qnil);

    /* last verification status */
    rb_iv_set(self, "@error", Qnil);
    rb_iv_set(self, "@error_string", Qnil);
    rb_iv_set(self, "@chain", Qnil);

    return self;
}

/*
 * call-seq:
 *   store.flags = flags
 *
 * Sets the default flags used by certificate chain verification performed with
 * the Store.
 *
 * _flags_ consists of zero or more of the constants defined in OpenSSL::X509
 * with name V_FLAG_* or'ed together.
 *
 * OpenSSL::X509::StoreContext#flags= can be used to change the flags for a
 * single verification operation.
 *
 * See also the man page X509_VERIFY_PARAM_set_flags(3).
 */
static VALUE
ossl_x509store_set_flags(VALUE self, VALUE flags)
{
    X509_STORE *store;
    long f = NUM2LONG(flags);

    GetX509Store(self, store);
    X509_STORE_set_flags(store, f);

    return flags;
}

/*
 * call-seq:
 *   store.purpose = purpose
 *
 * Sets the store's default verification purpose. If specified,
 * the verifications on the store will check every certificate's extensions are
 * consistent with the purpose. The purpose is specified by constants:
 *
 * * X509::PURPOSE_SSL_CLIENT
 * * X509::PURPOSE_SSL_SERVER
 * * X509::PURPOSE_NS_SSL_SERVER
 * * X509::PURPOSE_SMIME_SIGN
 * * X509::PURPOSE_SMIME_ENCRYPT
 * * X509::PURPOSE_CRL_SIGN
 * * X509::PURPOSE_ANY
 * * X509::PURPOSE_OCSP_HELPER
 * * X509::PURPOSE_TIMESTAMP_SIGN
 *
 * OpenSSL::X509::StoreContext#purpose= can be used to change the value for a
 * single verification operation.
 *
 * See also the man page X509_VERIFY_PARAM_set_purpose(3).
 */
static VALUE
ossl_x509store_set_purpose(VALUE self, VALUE purpose)
{
    X509_STORE *store;
    int p = NUM2INT(purpose);

    GetX509Store(self, store);
    X509_STORE_set_purpose(store, p);

    return purpose;
}

/*
 * call-seq:
 *   store.trust = trust
 *
 * Sets the default trust settings used by the certificate verification with
 * the store.
 *
 * OpenSSL::X509::StoreContext#trust= can be used to change the value for a
 * single verification operation.
 *
 * See also the man page X509_VERIFY_PARAM_set_trust(3).
 */
static VALUE
ossl_x509store_set_trust(VALUE self, VALUE trust)
{
    X509_STORE *store;
    int t = NUM2INT(trust);

    GetX509Store(self, store);
    X509_STORE_set_trust(store, t);

    return trust;
}

/*
 * call-seq:
 *   store.time = time
 *
 * Sets the time to be used in the certificate verifications with the store.
 * By default, if not specified, the current system time is used.
 *
 * OpenSSL::X509::StoreContext#time= can be used to change the value for a
 * single verification operation.
 *
 * See also the man page X509_VERIFY_PARAM_set_time(3).
 */
static VALUE
ossl_x509store_set_time(VALUE self, VALUE time)
{
    X509_STORE *store;
    X509_VERIFY_PARAM *param;

    GetX509Store(self, store);
    param = X509_STORE_get0_param(store);
    X509_VERIFY_PARAM_set_time(param, NUM2LONG(rb_Integer(time)));
    return time;
}

/*
 * call-seq:
 *   store.add_file(file) -> self
 *
 * Adds the certificates in _file_ to the certificate store. _file_ is the path
 * to the file, and the file contains one or more certificates in PEM format
 * concatenated together.
 *
 * See also the man page X509_LOOKUP_file(3).
 */
static VALUE
ossl_x509store_add_file(VALUE self, VALUE file)
{
    X509_STORE *store;
    X509_LOOKUP *lookup;
    const char *path;

    GetX509Store(self, store);
    path = StringValueCStr(file);
    lookup = X509_STORE_add_lookup(store, X509_LOOKUP_file());
    if (!lookup)
        ossl_raise(eX509StoreError, "X509_STORE_add_lookup");
    if (X509_LOOKUP_load_file(lookup, path, X509_FILETYPE_PEM) != 1)
        ossl_raise(eX509StoreError, "X509_LOOKUP_load_file");

    return self;
}

/*
 * call-seq:
 *   store.add_path(path) -> self
 *
 * Adds _path_ as the hash dir to be looked up by the store.
 *
 * See also the man page X509_LOOKUP_hash_dir(3).
 */
static VALUE
ossl_x509store_add_path(VALUE self, VALUE dir)
{
    X509_STORE *store;
    X509_LOOKUP *lookup;
    const char *path;

    GetX509Store(self, store);
    path = StringValueCStr(dir);
    lookup = X509_STORE_add_lookup(store, X509_LOOKUP_hash_dir());
    if (!lookup)
        ossl_raise(eX509StoreError, "X509_STORE_add_lookup");
    if (X509_LOOKUP_add_dir(lookup, path, X509_FILETYPE_PEM) != 1)
        ossl_raise(eX509StoreError, "X509_LOOKUP_add_dir");

    return self;
}

/*
 * call-seq:
 *   store.set_default_paths
 *
 * Configures _store_ to look up CA certificates from the system default
 * certificate store as needed basis. The location of the store can usually be
 * determined by:
 *
 * * OpenSSL::X509::DEFAULT_CERT_FILE
 * * OpenSSL::X509::DEFAULT_CERT_DIR
 *
 * See also the man page X509_STORE_set_default_paths(3).
 */
static VALUE
ossl_x509store_set_default_paths(VALUE self)
{
    X509_STORE *store;

    GetX509Store(self, store);
    if (X509_STORE_set_default_paths(store) != 1)
        ossl_raise(eX509StoreError, "X509_STORE_set_default_paths");

    return Qnil;
}

/*
 * call-seq:
 *   store.add_cert(cert) -> self
 *
 * Adds the OpenSSL::X509::Certificate _cert_ to the certificate store.
 *
 * See also the man page X509_STORE_add_cert(3).
 */
static VALUE
ossl_x509store_add_cert(VALUE self, VALUE arg)
{
    X509_STORE *store;
    X509 *cert;

    cert = GetX509CertPtr(arg); /* NO NEED TO DUP */
    GetX509Store(self, store);
    if (X509_STORE_add_cert(store, cert) != 1)
        ossl_raise(eX509StoreError, "X509_STORE_add_cert");

    return self;
}

/*
 * call-seq:
 *   store.add_crl(crl) -> self
 *
 * Adds the OpenSSL::X509::CRL _crl_ to the store.
 *
 * See also the man page X509_STORE_add_crl(3).
 */
static VALUE
ossl_x509store_add_crl(VALUE self, VALUE arg)
{
    X509_STORE *store;
    X509_CRL *crl;

    crl = GetX509CRLPtr(arg); /* NO NEED TO DUP */
    GetX509Store(self, store);
    if (X509_STORE_add_crl(store, crl) != 1)
        ossl_raise(eX509StoreError, "X509_STORE_add_crl");

    return self;
}

static VALUE ossl_x509stctx_get_err(VALUE);
static VALUE ossl_x509stctx_get_err_string(VALUE);
static VALUE ossl_x509stctx_get_chain(VALUE);

/*
 * call-seq:
 *   store.verify(cert, chain = nil) -> true | false
 *
 * Performs a certificate verification on the OpenSSL::X509::Certificate _cert_.
 *
 * _chain_ can be an array of OpenSSL::X509::Certificate that is used to
 * construct the certificate chain.
 *
 * If a block is given, it overrides the callback set by #verify_callback=.
 *
 * After finishing the verification, the error information can be retrieved by
 * #error, #error_string, and the resulting complete certificate chain can be
 * retrieved by #chain.
 */
static VALUE
ossl_x509store_verify(int argc, VALUE *argv, VALUE self)
{
    VALUE cert, chain;
    VALUE ctx, proc, result;

    rb_scan_args(argc, argv, "11", &cert, &chain);
    ctx = rb_funcall(cX509StoreContext, rb_intern("new"), 3, self, cert, chain);
    proc = rb_block_given_p() ?  rb_block_proc() :
           rb_iv_get(self, "@verify_callback");
    rb_iv_set(ctx, "@verify_callback", proc);
    result = rb_funcall(ctx, rb_intern("verify"), 0);

    rb_iv_set(self, "@error", ossl_x509stctx_get_err(ctx));
    rb_iv_set(self, "@error_string", ossl_x509stctx_get_err_string(ctx));
    rb_iv_set(self, "@chain", ossl_x509stctx_get_chain(ctx));

    return result;
}

/*
 * Private functions
 */
static void
ossl_x509stctx_mark(void *ptr)
{
    X509_STORE_CTX *ctx = ptr;
    // Note: this reference is stored as @verify_callback so we don't need to mark it.
    // However we do need to ensure GC compaction won't move it, hence why
    // we call rb_gc_mark here.
    rb_gc_mark((VALUE)X509_STORE_CTX_get_ex_data(ctx, stctx_ex_verify_cb_idx));
}

static void
ossl_x509stctx_free(void *ptr)
{
    X509_STORE_CTX *ctx = ptr;
    if (X509_STORE_CTX_get0_untrusted(ctx))
        sk_X509_pop_free(X509_STORE_CTX_get0_untrusted(ctx), X509_free);
    if (X509_STORE_CTX_get0_cert(ctx))
        X509_free(X509_STORE_CTX_get0_cert(ctx));
    X509_STORE_CTX_free(ctx);
}

static const rb_data_type_t ossl_x509stctx_type = {
    "OpenSSL/X509/STORE_CTX",
    {
        ossl_x509stctx_mark, ossl_x509stctx_free,
    },
    0, 0, RUBY_TYPED_FREE_IMMEDIATELY | RUBY_TYPED_WB_PROTECTED,
};

static VALUE
ossl_x509stctx_alloc(VALUE klass)
{
    X509_STORE_CTX *ctx;
    VALUE obj;

    obj = NewX509StCtx(klass);
    if ((ctx = X509_STORE_CTX_new()) == NULL)
        ossl_raise(eX509StoreError, "X509_STORE_CTX_new");
    SetX509StCtx(obj, ctx);

    return obj;
}

static VALUE
ossl_x509stctx_new(X509_STORE_CTX *ctx)
{
    VALUE obj;

    obj = NewX509StCtx(cX509StoreContext);
    SetX509StCtx(obj, ctx);

    return obj;
}

static VALUE ossl_x509stctx_set_flags(VALUE, VALUE);
static VALUE ossl_x509stctx_set_purpose(VALUE, VALUE);
static VALUE ossl_x509stctx_set_trust(VALUE, VALUE);

/*
 * call-seq:
 *   StoreContext.new(store, cert = nil, untrusted = nil)
 *
 * Sets up a StoreContext for a verification of the X.509 certificate _cert_.
 */
static VALUE
ossl_x509stctx_initialize(int argc, VALUE *argv, VALUE self)
{
    VALUE store, cert, chain;
    X509_STORE_CTX *ctx;
    X509_STORE *x509st;
    X509 *x509 = NULL;
    STACK_OF(X509) *x509s = NULL;
    int state;

    rb_scan_args(argc, argv, "12", &store, &cert, &chain);
    GetX509StCtx(self, ctx);
    GetX509Store(store, x509st);
    if (!NIL_P(cert))
        x509 = DupX509CertPtr(cert); /* NEED TO DUP */
    if (!NIL_P(chain)) {
        x509s = ossl_protect_x509_ary2sk(chain, &state);
        if (state) {
            X509_free(x509);
            rb_jump_tag(state);
        }
    }
    if (X509_STORE_CTX_init(ctx, x509st, x509, x509s) != 1){
        X509_free(x509);
        sk_X509_pop_free(x509s, X509_free);
        ossl_raise(eX509StoreError, "X509_STORE_CTX_init");
    }
    rb_iv_set(self, "@verify_callback", rb_iv_get(store, "@verify_callback"));
    rb_iv_set(self, "@cert", cert);

    return self;
}

/*
 * call-seq:
 *   stctx.verify -> true | false
 *
 * Performs the certificate verification using the parameters set to _stctx_.
 *
 * See also the man page X509_verify_cert(3).
 */
static VALUE
ossl_x509stctx_verify(VALUE self)
{
    X509_STORE_CTX *ctx;

    GetX509StCtx(self, ctx);
    VALUE cb = rb_iv_get(self, "@verify_callback");
    X509_STORE_CTX_set_ex_data(ctx, stctx_ex_verify_cb_idx, (void *)cb);
    RB_OBJ_WRITTEN(self, Qundef, cb);

    switch (X509_verify_cert(ctx)) {
      case 1:
        return Qtrue;
      case 0:
        ossl_clear_error();
        return Qfalse;
      default:
        ossl_raise(eX509StoreError, "X509_verify_cert");
    }
}

/*
 * call-seq:
 *   stctx.chain -> nil | Array of X509::Certificate
 *
 * Returns the verified chain.
 *
 * See also the man page X509_STORE_CTX_set0_verified_chain(3).
 */
static VALUE
ossl_x509stctx_get_chain(VALUE self)
{
    X509_STORE_CTX *ctx;
    const STACK_OF(X509) *chain;

    GetX509StCtx(self, ctx);
    chain = X509_STORE_CTX_get0_chain(ctx);
    if (!chain)
        return Qnil; /* Could be an empty array instead? */
    return ossl_x509_sk2ary(chain);
}

/*
 * call-seq:
 *   stctx.error -> Integer
 *
 * Returns the error code of _stctx_. This is typically called after #verify
 * is done, or from the verification callback set to
 * OpenSSL::X509::Store#verify_callback=.
 *
 * See also the man page X509_STORE_CTX_get_error(3).
 */
static VALUE
ossl_x509stctx_get_err(VALUE self)
{
    X509_STORE_CTX *ctx;

    GetX509StCtx(self, ctx);

    return INT2NUM(X509_STORE_CTX_get_error(ctx));
}

/*
 * call-seq:
 *   stctx.error = error_code
 *
 * Sets the error code of _stctx_. This is used by the verification callback
 * set to OpenSSL::X509::Store#verify_callback=.
 *
 * See also the man page X509_STORE_CTX_set_error(3).
 */
static VALUE
ossl_x509stctx_set_error(VALUE self, VALUE err)
{
    X509_STORE_CTX *ctx;

    GetX509StCtx(self, ctx);
    X509_STORE_CTX_set_error(ctx, NUM2INT(err));

    return err;
}

/*
 * call-seq:
 *   stctx.error_string -> String
 *
 * Returns the human readable error string corresponding to the error code
 * retrieved by #error.
 *
 * See also the man page X509_verify_cert_error_string(3).
 */
static VALUE
ossl_x509stctx_get_err_string(VALUE self)
{
    X509_STORE_CTX *ctx;
    long err;

    GetX509StCtx(self, ctx);
    err = X509_STORE_CTX_get_error(ctx);

    return rb_str_new2(X509_verify_cert_error_string(err));
}

/*
 * call-seq:
 *   stctx.error_depth -> Integer
 *
 * Returns the depth of the chain. This is used in combination with #error.
 *
 * See also the man page X509_STORE_CTX_get_error_depth(3).
 */
static VALUE
ossl_x509stctx_get_err_depth(VALUE self)
{
    X509_STORE_CTX *ctx;

    GetX509StCtx(self, ctx);

    return INT2NUM(X509_STORE_CTX_get_error_depth(ctx));
}

/*
 * call-seq:
 *   stctx.current_cert -> X509::Certificate
 *
 * Returns the certificate which caused the error.
 *
 * See also the man page X509_STORE_CTX_get_current_cert(3).
 */
static VALUE
ossl_x509stctx_get_curr_cert(VALUE self)
{
    X509_STORE_CTX *ctx;
    X509 *x509;

    GetX509StCtx(self, ctx);
    x509 = X509_STORE_CTX_get_current_cert(ctx);
    if (!x509)
        return Qnil;

    return ossl_x509_new(x509);
}

/*
 * call-seq:
 *   stctx.current_crl -> X509::CRL
 *
 * Returns the CRL which caused the error.
 *
 * See also the man page X509_STORE_CTX_get_current_crl(3).
 */
static VALUE
ossl_x509stctx_get_curr_crl(VALUE self)
{
    X509_STORE_CTX *ctx;
    X509_CRL *crl;

    GetX509StCtx(self, ctx);
    crl = X509_STORE_CTX_get0_current_crl(ctx);
    if (!crl)
        return Qnil;

    return ossl_x509crl_new(crl);
}

/*
 * call-seq:
 *   stctx.flags = flags
 *
 * Sets the verification flags to the context. This overrides the default value
 * set by Store#flags=.
 *
 * See also the man page X509_VERIFY_PARAM_set_flags(3).
 */
static VALUE
ossl_x509stctx_set_flags(VALUE self, VALUE flags)
{
    X509_STORE_CTX *store;
    long f = NUM2LONG(flags);

    GetX509StCtx(self, store);
    X509_STORE_CTX_set_flags(store, f);

    return flags;
}

/*
 * call-seq:
 *   stctx.purpose = purpose
 *
 * Sets the purpose of the context. This overrides the default value set by
 * Store#purpose=.
 *
 * See also the man page X509_VERIFY_PARAM_set_purpose(3).
 */
static VALUE
ossl_x509stctx_set_purpose(VALUE self, VALUE purpose)
{
    X509_STORE_CTX *store;
    int p = NUM2INT(purpose);

    GetX509StCtx(self, store);
    X509_STORE_CTX_set_purpose(store, p);

    return purpose;
}

/*
 * call-seq:
 *   stctx.trust = trust
 *
 * Sets the trust settings of the context. This overrides the default value set
 * by Store#trust=.
 *
 * See also the man page X509_VERIFY_PARAM_set_trust(3).
 */
static VALUE
ossl_x509stctx_set_trust(VALUE self, VALUE trust)
{
    X509_STORE_CTX *store;
    int t = NUM2INT(trust);

    GetX509StCtx(self, store);
    X509_STORE_CTX_set_trust(store, t);

    return trust;
}

/*
 * call-seq:
 *   stctx.time = time
 *
 * Sets the time used in the verification. If not set, the current time is used.
 *
 * See also the man page X509_VERIFY_PARAM_set_time(3).
 */
static VALUE
ossl_x509stctx_set_time(VALUE self, VALUE time)
{
    X509_STORE_CTX *store;
    long t;

    t = NUM2LONG(rb_Integer(time));
    GetX509StCtx(self, store);
    X509_STORE_CTX_set_time(store, 0, t);

    return time;
}

/*
 * INIT
 */
void
Init_ossl_x509store(void)
{
#undef rb_intern
    /* Register ext_data slot for verify callback Proc */
    stctx_ex_verify_cb_idx = X509_STORE_CTX_get_ex_new_index(0, (void *)"stctx_ex_verify_cb_idx", 0, 0, 0);
    if (stctx_ex_verify_cb_idx < 0)
        ossl_raise(eOSSLError, "X509_STORE_CTX_get_ex_new_index");
    store_ex_verify_cb_idx = X509_STORE_get_ex_new_index(0, (void *)"store_ex_verify_cb_idx", 0, 0, 0);
    if (store_ex_verify_cb_idx < 0)
        ossl_raise(eOSSLError, "X509_STORE_get_ex_new_index");

    eX509StoreError = rb_define_class_under(mX509, "StoreError", eOSSLError);

    /* Document-class: OpenSSL::X509::Store
     *
     * The X509 certificate store holds trusted CA certificates used to verify
     * peer certificates.
     *
     * The easiest way to create a useful certificate store is:
     *
     *   cert_store = OpenSSL::X509::Store.new
     *   cert_store.set_default_paths
     *
     * This will use your system's built-in certificates.
     *
     * If your system does not have a default set of certificates you can obtain
     * a set extracted from Mozilla CA certificate store by cURL maintainers
     * here: https://curl.haxx.se/docs/caextract.html (You may wish to use the
     * firefox-db2pem.sh script to extract the certificates from a local install
     * to avoid man-in-the-middle attacks.)
     *
     * After downloading or generating a cacert.pem from the above link you
     * can create a certificate store from the pem file like this:
     *
     *   cert_store = OpenSSL::X509::Store.new
     *   cert_store.add_file 'cacert.pem'
     *
     * The certificate store can be used with an SSLSocket like this:
     *
     *   ssl_context = OpenSSL::SSL::SSLContext.new
     *   ssl_context.verify_mode = OpenSSL::SSL::VERIFY_PEER
     *   ssl_context.cert_store = cert_store
     *
     *   tcp_socket = TCPSocket.open 'example.com', 443
     *
     *   ssl_socket = OpenSSL::SSL::SSLSocket.new tcp_socket, ssl_context
     */

    cX509Store = rb_define_class_under(mX509, "Store", rb_cObject);
    /*
     * The callback for additional certificate verification. It is invoked for
     * each certificate in the chain and can be used to implement custom
     * certificate verification conditions.
     *
     * The callback is invoked with two values, a boolean that indicates if the
     * pre-verification by OpenSSL has succeeded or not, and the StoreContext in
     * use.
     *
     * The callback can use StoreContext#error= to change the error code as
     * needed. The callback must return either true or false.
     *
     * NOTE: any exception raised within the callback will be ignored.
     *
     * See also the man page X509_STORE_CTX_set_verify_cb(3).
     */
    rb_attr(cX509Store, rb_intern("verify_callback"), 1, 0, Qfalse);
    /*
     * The error code set by the last call of #verify.
     *
     * See also StoreContext#error.
     */
    rb_attr(cX509Store, rb_intern("error"), 1, 0, Qfalse);
    /*
     * The description for the error code set by the last call of #verify.
     *
     * See also StoreContext#error_string.
     */
    rb_attr(cX509Store, rb_intern("error_string"), 1, 0, Qfalse);
    /*
     * The certificate chain constructed by the last call of #verify.
     *
     * See also StoreContext#chain.
     */
    rb_attr(cX509Store, rb_intern("chain"), 1, 0, Qfalse);
    rb_define_alloc_func(cX509Store, ossl_x509store_alloc);
    rb_define_method(cX509Store, "initialize",   ossl_x509store_initialize, -1);
    rb_undef_method(cX509Store, "initialize_copy");
    rb_define_method(cX509Store, "verify_callback=", ossl_x509store_set_vfy_cb, 1);
    rb_define_method(cX509Store, "flags=",       ossl_x509store_set_flags, 1);
    rb_define_method(cX509Store, "purpose=",     ossl_x509store_set_purpose, 1);
    rb_define_method(cX509Store, "trust=",       ossl_x509store_set_trust, 1);
    rb_define_method(cX509Store, "time=",        ossl_x509store_set_time, 1);
    rb_define_method(cX509Store, "add_path",     ossl_x509store_add_path, 1);
    rb_define_method(cX509Store, "add_file",     ossl_x509store_add_file, 1);
    rb_define_method(cX509Store, "set_default_paths", ossl_x509store_set_default_paths, 0);
    rb_define_method(cX509Store, "add_cert",     ossl_x509store_add_cert, 1);
    rb_define_method(cX509Store, "add_crl",      ossl_x509store_add_crl, 1);
    rb_define_method(cX509Store, "verify",       ossl_x509store_verify, -1);

    /*
     * Document-class: OpenSSL::X509::StoreContext
     *
     * A StoreContext is used while validating a single certificate and holds
     * the status involved.
     */
    cX509StoreContext = rb_define_class_under(mX509,"StoreContext", rb_cObject);
    rb_define_alloc_func(cX509StoreContext, ossl_x509stctx_alloc);
    rb_define_method(cX509StoreContext, "initialize", ossl_x509stctx_initialize, -1);
    rb_undef_method(cX509StoreContext, "initialize_copy");
    rb_define_method(cX509StoreContext, "verify", ossl_x509stctx_verify, 0);
    rb_define_method(cX509StoreContext, "chain", ossl_x509stctx_get_chain,0);
    rb_define_method(cX509StoreContext, "error", ossl_x509stctx_get_err, 0);
    rb_define_method(cX509StoreContext, "error=", ossl_x509stctx_set_error, 1);
    rb_define_method(cX509StoreContext, "error_string", ossl_x509stctx_get_err_string,0);
    rb_define_method(cX509StoreContext, "error_depth", ossl_x509stctx_get_err_depth, 0);
    rb_define_method(cX509StoreContext, "current_cert", ossl_x509stctx_get_curr_cert, 0);
    rb_define_method(cX509StoreContext, "current_crl", ossl_x509stctx_get_curr_crl, 0);
    rb_define_method(cX509StoreContext, "flags=", ossl_x509stctx_set_flags, 1);
    rb_define_method(cX509StoreContext, "purpose=", ossl_x509stctx_set_purpose, 1);
    rb_define_method(cX509StoreContext, "trust=", ossl_x509stctx_set_trust, 1);
    rb_define_method(cX509StoreContext, "time=", ossl_x509stctx_set_time, 1);
}